Question 1

Steering angle sensors are being discussed. Technician A says that the steering angle sensor measures steering rotation in degrees of turn of steering wheel. Technician B says that the steering angle sensor measures the turning torque of steering wheel applied by the driver. Who is correct?

Accepted Answer

A)  A only
B)  B only
C)  Both A and B
D)  Neither A nor BE) A) and B)
F) B) and C)

Question 2

Which of the following choices is the proper order of preliminary checks when diagnosing a computer controlled system?

Accepted Answer

A)  Verify the  complaint, check for any bulletins that may be pertinent to the problem, check for any trouble codes.
B)  Check for trouble codes, verify the complaint, check any bulletins that may be pertinent to the problem.
C)  Verify the complaint, check any bulletins that may be pertinent to the problem, check for trouble codes.
D)  Check for trouble codes, check any bulletins that may be pertinent to the problem, verify the complaint.E) B) and C)
F) C) and D)

Question 3

ESC is being discussed. Technician A says part or all of the start-up initialization may occur at key-on, and/or at a certain speed while driving. Technician B says some systems perform initialization test during a stability control event. Who is correct?

Accepted Answer

A)  A only
B)  B only
C)  Both A and B
D)  Neither A nor BE) A) and B)
F) All of the above

Question 4

By some estimates as many as 80 percent of all accidents are caused by driver inattention.

Accepted Answer

A) True 
 B)False

Question 5

The ________ ____________ uses two motor generators: MG1 and MG2.

Accepted Answer

The answer of The ________ ____________ uses two motor generators:...

Question 6

Most hybrid vehicles use _______________________  to slow the vehicle down and convert kinetic energy into electrical energy.

Accepted Answer

regenerati...

Question 7

Explain the purpose of the APP sensor.

Accepted Answer

The accelerator peda...

Question 8

The Toyota Prius uses two electric motor generators: MG1 and MG2. Technician A says that MG1 is used as a generator when braking and on deceleration. Technician B says that the MG2 is used as an electric motor drive. Who is correct?

Accepted Answer

A)  A only
B)  B only
C)  Both A and B
D)  Neither A nor BE) B) and C)
F) A) and D)

Question 9

Yaw sensors are being discussed. Technician A says most yaw sensors produce a DC voltage signal. Technician B says most yaw sensors contain mercury. Who is correct?

Accepted Answer

A)  A only
B)  B only
C)  Both A and B
D)  Neither A nor BE) C) and D)
F) A) and C)

Question 10

Explain the purpose of the brake pressure sensor.

Accepted Answer

The brake pressure sensor measures the b...

Question 11

Technician A says the yaw sensor/lateral accelerometer sensors can be combined into one sensor. Technician B says that some lateral acceleration sensors can perform their own independent self-test. Who is correct?

Accepted Answer

A)  A only
B)  B only
C)  Both A and B
D)  Neither A nor BE) A) and B)
F) None of the above

Question 12

Which of the following statements is correct about  beam-type Hall-effect yaw sensors?

Accepted Answer

A)  They are the oldest type of yaw sensor.
B)  They are the newest type of yaw sensor.
C)  They receive a  10-volt signal from the EBCM and return some portion of that voltage as signal.
D)  They do not return any portion of the voltage received as a signal.E) C) and D)
F) A) and B)

Question 13

The yaw sensor can measure the difference between the actual direction that the vehicle is traveling and the direction the driver is trying to steer the vehicle by way of the steering angle sensor. This difference is called the ____________________.

Accepted Answer

The answer of The yaw sensor can measure the difference...

Question 14

____________________ works with the vehicles struts/shock absorbers to prevent body roll in hard turns.

Accepted Answer

(ARC)Activ...

Question 15

A voltmeter is used to recalibrate the steering position sensor.

Accepted Answer

A) True 
 B)False

Question 16

Depending on the manufacturer, the stability control network of modules may include all the following modules EXCEPT:

Accepted Answer

A)  Engine control module (ECM) 
B)  Power train control module (PCM) 
C)  Electronic brake control module (EBCM) 
D)  Electronic pedal actuator (EP
A)  E) A) and C)
F) None of the above

Question 17

Which of the following best describes the operation of the APP sensor?

Accepted Answer

A)  Sensor 1 starts out at 0 volts and increases with increasing throttle angle.
B)  Sensor 2 starts out at 0 volts and increases with increasing throttle angle.
C)  Both A and B are correct
D)  Neither A nor B are correctE) B) and C)
F) A) and D)

Question 18

____________________ vehicles utilize regenerative braking to help recharge the batteries .

Accepted Answer

The answer of ____________________ vehicles utilize regenerative braking to help...

Question 19

Distronic is  the name that Mercedes gave their cruise control that has the ability to maintain a safe distance from other vehicles on the road ahead with no input from the driver .

Accepted Answer

A) True 
 B)False

Question 20

Explain the situations when the steering angle sensor has to be recentered or relearned.

Accepted Answer

1. A front wheel alignment
2. Outer ti...

Exam 11: Advanced Braking Systems

By some estimates as many as 80 percent of all accidents are caused by driver inattention.

Correct AnswerverifiedShow Answer

Explain the purpose of the APP sensor.

Correct AnswerverifiedThe accelerator peda...View AnswerShow Answer

Steering angle sensors are being discussed. Technician A says that the steering angle sensor measures steering rotation in degrees of turn of steering wheel. Technician B says that the steering angle sensor measures the turning torque of steering wheel applied by the driver. Who is correct?

Correct AnswerverifiedShow Answer

Yaw sensors are being discussed. Technician A says most yaw sensors produce a DC voltage signal. Technician B says most yaw sensors contain mercury. Who is correct?

Correct AnswerverifiedShow Answer

Which of the following choices is the proper order of preliminary checks when diagnosing a computer controlled system?

Correct AnswerverifiedShow Answer

Depending on the manufacturer, the stability control network of modules may include all the following modules EXCEPT:

Correct AnswerverifiedShow Answer

Technician A says the yaw sensor/lateral accelerometer sensors can be combined into one sensor. Technician B says that some lateral acceleration sensors can perform their own independent self-test. Who is correct?

Correct AnswerverifiedShow Answer

____________________ works with the vehicles struts/shock absorbers to prevent body roll in hard turns.

Correct Answerverified(ARC)Activ...View AnswerShow Answer

The yaw sensor can measure the difference between the actual direction that the vehicle is traveling and the direction the driver is trying to steer the vehicle by way of the steering angle sensor. This difference is called the ____________________.

Correct AnswerverifiedShow Answer

Which of the following statements is correct about beam-type Hall-effect yaw sensors?

Correct AnswerverifiedShow Answer

Explain the situations when the steering angle sensor has to be recentered or relearned.

Correct Answerverified1. A front wheel alignment 2. Outer ti...View AnswerShow Answer

The ________ ____________ uses two motor generators: MG1 and MG2.

Correct AnswerverifiedShow Answer

Explain the purpose of the brake pressure sensor.

Correct AnswerverifiedThe brake pressure sensor measures the b...View AnswerShow Answer

ESC is being discussed. Technician A says part or all of the start-up initialization may occur at key-on, and/or at a certain speed while driving. Technician B says some systems perform initialization test during a stability control event. Who is correct?

Correct AnswerverifiedShow Answer

Distronic is the name that Mercedes gave their cruise control that has the ability to maintain a safe distance from other vehicles on the road ahead with no input from the driver .

Correct AnswerverifiedShow Answer

Most hybrid vehicles use _______________________ to slow the vehicle down and convert kinetic energy into electrical energy.

Correct Answerverifiedregenerati...View AnswerShow Answer

The Toyota Prius uses two electric motor generators: MG1 and MG2. Technician A says that MG1 is used as a generator when braking and on deceleration. Technician B says that the MG2 is used as an electric motor drive. Who is correct?

Correct AnswerverifiedShow Answer

A voltmeter is used to recalibrate the steering position sensor.

Correct AnswerverifiedShow Answer

____________________ vehicles utilize regenerative braking to help recharge the batteries .

Correct AnswerverifiedShow Answer

Which of the following best describes the operation of the APP sensor?

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified
The accelerator peda...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
(ARC)Activ...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
1. A front wheel alignment
2. Outer ti...
View Answer

The ____ uses two motor generators: MG1 and MG2.

Correct Answer
verified

Correct Answer
verified
The brake pressure sensor measures the b...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
regenerati...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified